Macroreer SFP+ Direct Attach Copper Cables for EX Series Switches, 1-meter, 100% Juniper Compatible( $21.99)
Item Link: http://amzn.to/2a1NBbt
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables, also known as Twinax cables, are suitable for in-rack connections between servers and switches. They are suitable for short distances of up to 23 ft (7 m), making them ideal for highly cost-effective networking connectivity within a rack and between adjacent racks.
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a straight cable with no active electronic components. EX Series switches support 1 m, 3 m, 5 m, and 7 m long SFP+ passive DAC cables.
The cables are hot-removable and hot-insertable: You can remove and replace them without powering off the switch or disrupting switch functions. A cable comprises a low-voltage cable assembly that connects directly into two 10-Gigabit Ethernet ports, one at each end of the cable. The cables use high-performance integrated duplex serial data links for bidirectional communication and are designed for data rates of up to 10 Gbps.
EX-SFP-10GE-DAC-1M
Rate
10-Gbps full-duplex serial transmission
Connector type
SFP+ passive Twinax cable assembly
Supply voltage
3.3 V
Power consumption (per end)
0.57 W
Storage temperature
–40° F (–40° C) through 185° F (85° C)
Cable type
Twinax
Wire AWG
30 AWG
Minimum cable bend radius
1 in. (2.54 cm)
Cable characteristic impedance
100 ohms
Crosstalk between pairs
2% maximum
Time delay
1.31 nsec/ft
Length
3.3 ft (1 m)
Item Link: http://amzn.to/2a1NBbt
Small form-factor pluggable plus transceiver (SFP+) direct attach copper (DAC) cables, also known as Twinax cables, are suitable for in-rack connections between servers and switches. They are suitable for short distances of up to 23 ft (7 m), making them ideal for highly cost-effective networking connectivity within a rack and between adjacent racks.
EX Series switches support SFP+ passive DAC cables. The passive Twinax cable is a straight cable with no active electronic components. EX Series switches support 1 m, 3 m, 5 m, and 7 m long SFP+ passive DAC cables.
The cables are hot-removable and hot-insertable: You can remove and replace them without powering off the switch or disrupting switch functions. A cable comprises a low-voltage cable assembly that connects directly into two 10-Gigabit Ethernet ports, one at each end of the cable. The cables use high-performance integrated duplex serial data links for bidirectional communication and are designed for data rates of up to 10 Gbps.
EX-SFP-10GE-DAC-1M
Rate
10-Gbps full-duplex serial transmission
Connector type
SFP+ passive Twinax cable assembly
Supply voltage
3.3 V
Power consumption (per end)
0.57 W
Storage temperature
–40° F (–40° C) through 185° F (85° C)
Cable type
Twinax
Wire AWG
30 AWG
Minimum cable bend radius
1 in. (2.54 cm)
Cable characteristic impedance
100 ohms
Crosstalk between pairs
2% maximum
Time delay
1.31 nsec/ft
Length
3.3 ft (1 m)
){kind=link}
0 Comments